Roof Talk-101 How Rainwater Catchment Can Help in Drought Areas

Roof Talk-101  

How Rainwater Catchment Can Help in Drought Areas

Martin Grohman

Did you know that one inch of rain falling on 1,000 square feet of a roof amounts to 640 gallons of water? That’s a significant amount of water—more than most households use in a day—and evidence of the fact that in a typical year (and in a temperate climate), thousands and thousands of gallons of available water are running off your roof.

The most common term for collecting water for household use these days is “rainwater catchment.” While still rare in the United States, it is quite common in other parts of the world, notably in the Caribbean. However, partly out of necessity and partly for reasons of conservation and sustainability, rainwater catchment is becoming more common in the United States.

Consider the fact that you’re watering your lawn and flushing your toilets with drinking water, and think about using rainwater for those times instead.

Rainwater catchment doesn’t have to be complex: you can start with a rain barrel and catch water for the lawn. More advanced systems incorporate a device called a first flush diverter. This diverts the rain that falls for the first few minutes away from your catchment system or barrels in order to “wash” the roof of pollen and other buildup that has accumulated since the last rain. From there, additional advances include filtration, treatment, and underground storage cisterns.

To really get where we need to be with rainwater catchment, significant plumbing work is required. That’s because separate systems for drinking water and rainwater would be needed for most homes. However, there has been some progress in this area, including the development of a standardized piping color (purple) for irrigation water.

Industrial users can benefit from rainwater catchment systems as well. A common use of rainwater is for cooling tower systems, which rely on evaporative cooling and thus require large amounts of makeup water to replace that which has evaporated. A rainwater catchment system on a large commercial roof paired with storage tanks—often mounted directly on the roof or sometimes buried under a parking lot—can easily supply this makeup water. And again, why use drinking water for this?

Have you experienced a water shortage in your area? Have you looked into rainwater catchment or other methods to use the roof as a water-savings asset? The day may come for more of the country as Net Zero homes also try to achieve Net Zero water.

ROOFGUARD-LLC has been installing commercial roofing systems for over 30 years. We have the solutions you are looking for if you desire a new commercial roof or need a re-roof. ROOFGUARD-LLC only uses the best products and installation practices to insure you have a worry free commercial roof. For more information visit us at. www.roofguardtexas.com and we also invite you to Like Us on our Roofguardtexas Facebook Page .

Roof Talk-101 10 Reasons to Coat a Commercial Roof

Liza Barth

When assessing the condition of a commercial roof, it’s important to keep in mind that there are other options besides the typical repair or replace. In fact, coating may be the best choice. Here are some reasons to choose to coat a commercial roof instead of replacing or repairing it:

• The roof is sound, but needs reflectivity. As long as the current roof is sound with no wet insulation or active leaks, then coating can help. Coating extends the life of the roof membrane by protecting it from harmful UV rays that can cause “alligatoring,” as well as reducing heat that causes thermal expansion and contraction. Excessive thermal expansion and contraction can prematurely age the membrane, causing cracks, split seams, and blisters.
• To provide energy savings by reducing heat transfer into the building and therefore reducing air-conditioning costs. A dark roof can reach temperatures of over 150°F.  A cool roof could drop that temperature by 50°F or more.
• To help improve the inside comfort of the building especially with un-air- conditioned spaces.
• To improve the appearance of the existing roof by changing it to white or adding a color.
• To avoid inconveniencing tenants if the building is occupied. With a tear-off, tenants may need to relocate for a period of time or deal with noise, dust, and other issues that can affect their business productivity.
• To reduce the risk of exposing the roof. Coating does not require a tear-off and therefore does not expose the roof to the elements. If the roof already has up-to-code insulation, it’s not necessary to tear it off to bring the roof up to code.
• There is a tight budget. Coating can be a lower-cost choice while still giving the roof the proper protection it needs.
• There are many penetrations or equipment on the roof that would be difficult and costly to change, such as air-conditioning systems.
• There is a plan to sell the building in a few years. Coating is a good choice if an owner doesn’t want to invest much in the building, but still wants it to look better and extend the life of the roof until they sell.
• To simply add an additional level of protection from leaks.

Coating is a cost-effective solution to extend the life of the roof. Plus, there may be rebates and potential tax advantages since coatings are often considered a maintenance item. If you decide coating is right for your building, check with a certified contractor to properly evaluate your roof before doing any work.


ROOFGUARD-LLC has been installing commercial roofing systems for over 30 years. We have the solutions you are looking for if you desire a new commercial roof or need a re-roof. ROOFGUARD-LLC only uses the best products and installation practices to insure you have a worry free commercial roof. For more information visit us at. www.roofguardtexas.com and we also invite you to Like Us on our Roofguardtexas Facebook Page .

Roof Talk-101 10 Common Commercial Roof Problems

Liza Barth

Problems on a roof can happen to any building, but most of the issues are largely preventable through planning. Several factors will influence a roof’s service life: design quality installation, products, maintenance, roof use, abuse, and weather. The 10 roof problems listed below are common occurrences, but through quality work and planning, most can be easily dealt with before a major, expensive problem occurs.

Problem #1: Roof leaks. With any type of roof, if it is leaking then you have a problem.

Solution: A proactive preventative maintenance program can eliminate or reduce building interior water intrusion.

Problem #2: Blow-offs, tenting, or billowing. This occurs if the roof is not adhered properly to the substrate. Single-ply roofs are at risk for blow-off and billowing.

Solution: Ask your roofing contractor to provide the proper specification or building code for your area when installing a new roof.

Problem #3: Poor installation or workmanship. A faulty installation increases the likelihood of problems and reduces a roof system’s life expectancy. Workmanship tends to be one of the more common problems or reasons for problems down the road.

Solution: Ask your contractor for a checklist specific to the roof system that should be used for information-gathering (data-collecting) and reporting. Also ask about moisture surveys. Roofs with insulation should be surveyed prior to being overlayed via non-destructive methods. Have your contractor provide a written inspection report, complete with digital photos. Clear details on any structural changes or modifications to the roof surface should also be provided to you.

Problem #4: Lack of maintenance. There are many reasons not to neglect a roof, including financial and safety, but it’s important to have routine inspections done. Ponding water, a base flashing that is slipping, or pitch pockets that haven’t been filled are items that can be easily spotted and fixed.

Solution: To maximize roof service life, a proactive maintenance program should begin in year #1. If you wait too long to initiate the program, you will reduce the potential benefits.

Problem #5: Ponding water.The National Roofing Contractors Association (NRCA) has classified “undesirable” ponding water as standing for more than 48 hours, although ponding can pose a threat in even shorter time spans. A matter of “deep” concern in the roofing industry is the fact that a 1” deep pond weighs 5.2 lbs./square foot. The additional weight of the load may pose a threat to the structural integrity of the building, with a very real possibility of roof collapse in extreme cases.

Solution: Look into ways to address proper drainage on the roof by adding roof drains or using tapered roof insulation. Also, check the flashings, as they can be a source of leaks.

Problem #6: Punctures and the addition of penetrations. For those with single-ply roof systems, damage from foot traffic can be problematic.

Solution: Limit traffic and conduct cursory inspections after tradespeople have been on the roof.

Problem #7: Safety. Fires, odors, slips, and falls are common issues that occur on the roof.

Solution: Make sure you have all the proper personal protection equipment, such as safety glasses, approved footwear, and hard hats. You should also have a copy of all the MSDS information for all the products being installed on the roof.

Problem #8: Improper repairs. Using materials that are not intended for application on specific roof types can result in permanent damage.

Solution: Ask your roofing contractor if they are certified from the manufacturer to install and repair your roof.

Problem #9: Shrinkage. Single-ply roof types are unique. If you walk out onto an EPDM roof, one of the first things you’re going to look for is evidence of shrinkage. The two items most commonly seen are flashings pulling away from the wall or curb and crazing and cracking of uncured membrane, which is commonly used at perimeter and penetration flashings.

Solution: Make sure you’re conducting visual inspections. Some experts recommend a minimum of two per year (late fall and early spring)…certainly at least annually.

Problem #10: Blistering, ridging, splitting, and surface erosion. These issues are commonly found with BUR roof systems, but can also happen in some single-ply systems.

Solution: Do your homework and make sure you select a certified and licensed roofing contractor before selecting or installing your new roof.

ROOFGUARD-LLC has been installing commercial roofing systems for over 30 years. We have the solutions you are looking for if you desire a new commercial roof or need a re-roof. ROOFGUARD-LLC only uses the best products and installation practices to insure you have a worry free commercial roof. For more information visit us at. www.roofguardtexas.com and we also invite you to Like Us on our Roofguardtexas Facebook Page .